How to Charge Electric Roller Skates?

First, you need to open the silicon protector of the electric roller skate charging port. Check if there is any debris or water.

If yes, you can use a cotton swab to clean and dry the charging port.

Note: Make sure the charging port is dry and clean before charging.

Turn off the remote control and place the shoes on flat, dry ground or a table.

Note: Ensure the remote control is off while charging the skates to prevent wrong touching and accidents.

The Rollwalk charger has two sub-cables so you can charge two RollWalk skates simultaneously.

We have two types of chargers: 45W and 90W.

With the 45W charger, you can fully charge your electric roller skates in 2 hours.

The 90W charger takes about 1 hour to charge the roller skates fully.

Note: It's worth mentioning that using a 45W charger to charge the eRW3 can extend the battery life.

First, plug the charger into the wall before plugging it into the roller skates, and then you will see the charger's indicator light turns green.

Second, connect the charger plug to the skates' charging port, and the charger light turns red.

Third, charge until the indicator light on the charger turns green and promptly disconnects.

Disconnect the skates from the charger first, then unplug the charger from the wall outlet.

Charge as often as needed.

Note: Remember to reseal the silicon protector of the charging port to prevent debris or water during use.

Please read the instruction manual carefully before using the electric roller skates. 

Remember to wear proper gear for safety rides, such as helmets, elbow pads,

wrist guards, and knee pads.

If you have any questions or problems, email us via support@rollwalk.com.

Alternatively, you can join our Facebook group and post your question directly in the group.

Thanks for watching, and see you next time!